Tuesday, November 3, 2026

PolyPipeX for Onshape V1.00: Any Edge Is a Path, with Grok's Help



The Matrix tab of the Demo doc: 40 shape and option combinations, all made with PolyPipeX.

Some of you may remember PolyPipe, my 2023 Onshape FeatureScript. It was a remix of the simple 'Pipe' FeatureScript.

This October I sat down with Grok to see how far it could go. That "GrokPipe" work grew into something new, and on Nov 2 I released PolyPipeX V1.00.

What it does

PolyPipeX sweeps a profile along ANY edge: sketch lines, arcs, splines, construction lines, intersection curves, helixes and 3D curves.

The fun part is part edges. Pick an edge right on a part and add or cut a profile along it. It's like the reverse of Fillet and Chamfer. Pick several edges and you get several pipes at once.


One block, three PolyPipeX features, each on an edge picked right off the part (no sketch): a round bead added along a top edge, a 4 x 4 rabbet cut and a round-over cut. This example is in the new "PolyPipeX Demo Part Edge" tab: https://cad.onshape.com/documents/bdedb1c31094967e66258764/v/7a0555a7372ca5b0a802fdbb

The menu

Profiles: Circle, Arc, Polygon/Star, Rectangle, Slot and Round over. Any of them can be solid or hollow.

Results: New, Add, Remove, Intersect, like Extrude. You can keep the pipe as a part, and cut a bore through the target.

Path options: reverse, use part of the path, extend or shorten the ends. Twist by turns or by pitch.

Uses: washers, edge trim, O-ring grooves, wire bundles and cables, reverse fillets, countersinks, flanges, round-overs.


The PolyPipeX dialog set up for that groove: Rectangle profile, Remove.


An O-ring groove cut (Remove) around a round part, along a sketch path.


The Uses tab: 9 example parts made with PolyPipeX.






A 4-wire ribbon bundle and a sleeved cable with copper-tipped conductors, all swept with PolyPipeX.

Working with Grok

Grok was a great help while writing this Onshape FeatureScript. Many thanks go to my Grok Bots, the Grok Dev Team, and Elon Musk.

Try it

How to add it:

  1. Open the PolyPipeX FeatureScript doc: https://cad.onshape.com/documents/e1d7954fe30ceed624c58ca8/v/e1e5b11796a2374ccb7bcce5
  2. In a Part Studio, open the Custom features (puzzle-piece) menu, then Add custom features.
  3. Search "PolyPipeX" (or paste the doc link), pick the PolyPipeX V1.00 feature studio, and it appears in your toolbar.

Let me know what you make with it, or what breaks.

--eldonb

Tuesday, February 10, 2026

3D Printing Filament Spools


Today I have been working on my relatively new 3D Printer; a Creality K2 Plus.  I have started printing filament spools to be used with Filament Refills.  Filament in refill form is much cheaper and I do not have to throw away the empty spools when done. I will soon share some photos, maybe.


--


Monday, February 9, 2026

It has been a while.

​Yes, it has been a while since I have posted on this blog, primarily because my interests have wandered into many other topics or areas. I still enjoy the Ham Radio Topics, but I may stray into other areas if I continue with this blog.

I now spend most of my free (retired) time in: software development, 3D Printing, wood-working, machine-shop and science in general.  My immediate interest are: Linux OS, HomeAssistant, high precision GPS locating, Meshtastic, home and remote networking with Tailscale, and Rustdesk.

I am also interested in maintaining my current Window 10 and Window 11 workstations, trying to Debloat them to keep them usable and worthwhile to have around, I found WinHance works well for that.

Some time after my last post, my dog "Tess" crossed the rainbow bridge, and my good friend "Larry Littlefield" also passed away about the same time as Tess (in 2020). Larry was always a good contributor to my projects and always had something interesting working on his own projects.  Sence larry's passing, I have found it very hard to find someone that has similar interests, most of my work is now on projects alone.

Two years after Tess crossed, I now have a new pup, her name is Tammy, she is now 4 years old.   


I may try to keep the blog alive, depending on effort and interest.



-- Home Page: https://WA0UWH.blogspot.com